GPS Flow Skid
Activating the PanelView
Pressing the Panelview activate button will enable the Panelview for 20 minutes. After 20 minutes have elapsed, the panelview will power down to conserve battery.
Resetting the flowmeter totalizers
To reset the flowmeter totalizer, press the “CLEAR TOTALIZER” button from Totalizer Screen on the HMI. Alternatively, set the value of the the boolean tag “cmd_ResetTotalizerA”, “cmd_ResetTotalizerB”, or “cmd_ResetTotalizerC” to TRUE.
Modbus Parameters
All devices need to be configured with the following Modbus Parameters:
- Baud Rate: 9600
- Parity: None
- Stop Bits: 2
Modbus Addresses
| Device | Address |
|---|---|
| Flowmeter | 1 |
| Solar Panel Charger | 20 |
Wiring Guide
Digital Inputs
| Channel | Device |
|---|---|
| 0 | HMI Activate Button |
Digital Outputs
| Channel | Device |
|---|---|
| 0 | HMI Enable Relay |